The 8 Best Crepe Makers of 2026

A crepe maker is a simple machine: a round hot plate, a thermostat, and a pool of thin batter. What separates a good one from a frustrating one is how evenly that plate holds heat and whether the batter grabs on contact or slides around in a puddle. Get both right and crepes become a ten-minute weeknight thing instead of a project.

I made crepes in a warped skillet for years, chasing batter with the back of a spoon, and the results were never worth the cleanup. So we cooked through 12 electric crepe makers — pouring, dipping, flipping, scrubbing — to find the ones that earn counter space.

The thermostat matters more than the diameter. A plate that holds steady heat turns out an even, lacy crepe at 8 inches, while a wide one that runs hot in the center and cool at the rim just gives you more uneven crepe. Nearly all of these double as a griddle for eggs and pancakes, and none cost much, so heat and cleanup end up deciding it. There are picks for first-timers and Sunday-brunch regulars alike.

Our Top Picks

The Best Crepe Makers

1

G&M Kitchen Essentials 12-Inch Crepe Maker Best Overall

Black G&M Kitchen Essentials 12-inch nonstick electric crepe maker with wooden spreader and spatula

Everyday family crepes

Bake Score 92/100
Power
1000 watts
Heat Settings
3
Cooking Surface
12 inches
Included
Batter spreader, wooden spatula, 100-recipe book
View on Amazon

A 12-inch nonstick plate, a batter spreader, a wooden spatula, and a hundred-recipe booklet arrive in the same box, and that bundle is why this is the machine we recommend first. The plate has a shallow lip, which turns out to be the detail that matters most for a beginner: pour in the middle, run the spreader outward, and the overflow stays on the plate instead of running onto the counter. A ready light takes the guesswork out of the preheat, and at just under three pounds the whole thing goes back into the cabinet without a fight.

The dial gives three numbered settings, fewer than some here, and the plate runs cooler than the numbers suggest — a familiar trait of thin aluminum. Give it a full preheat, cook one crepe at a time, and let the surface come back between them. Rush it and the crepes come out pale and tear at the spreader.

What tips it over the others is what comes with it. The cookbook is a genuine book rather than a folded leaflet, the spreader has a comfortable edge, and the lifetime replacement policy is the longest coverage in this group. A household that makes crepes a few Sundays a month and wants the same plate for pancakes, tortillas, and fried eggs gets more of what it actually needs in one box than anything else here.

Worth Noting

  • Only three heat settings to work with
Our Verdict

Our default recommendation: a forgiving 12-inch plate, a real recipe book, and the longest warranty here make it the easiest crepe maker to live with.

Check Latest Price
2

CucinaPro 1448 12-Inch Crepe Maker Best Temperature Control

Black CucinaPro 1448 12-inch nonstick electric crepe maker with ready light and wooden tools

Precise heat control

Bake Score 91/100
Power
1000 watts
Heat Settings
5
Cooking Surface
12 inches
Included
Batter spreader, wooden spatula, recipe booklet
View on Amazon

Five heat settings are the reason this one costs more than our top pick, and for some cooks they are the reason to pay it. Where a three-position dial jumps from warm to hot, the 1448 has enough stops to hold a low, steady plate for pale crepes and then come up for crisp, lacy edges. An on/off ready light signals that the surface is hot, and the thermostat cycles to keep it there rather than letting it climb.

We liked the shallow rim more than we expected. Batter that escapes the spreader stays on the plate instead of finding the counter, and the non-slip rubber feet keep the base planted while you work a wide circle. The plate cannot be dunked, so cleanup is a wipe with a damp cloth once it cools — easy with a paper towel, and only mildly annoying if a spill has baked on during a long session.

What you are buying here is control. If your goal is thin, even crepes with browned edges rather than thick weekend pancakes, this is the machine in this group for the job, and the five settings are what make the results repeatable from batch to batch.

Worth Noting

  • Short power cord limits outlet placement
  • One-year warranty only
Our Verdict

We recommend it for anyone chasing restaurant-thin crepes: five settings give you heat control the three-setting machines here cannot match.

Check Latest Price
3

Baker's Friend 8-Inch Crepe Maker Best for Small Kitchens

Aqua Baker's Friend 8-inch nonstick dip-style crepe maker with long handle and dipping dish

Small kitchens

Bake Score 90/100
Power
800 watts
Heat Settings
6
Cooking Surface
8 inches
Included
Dipping dish, spatula, recipe booklet
View on Amazon

The long handle is the part that makes this 8-inch dip plate work. Preheat the round plate on its base, lift it by the handle, and dip it face-down into the batter dish: no ladle, no spreading, no tilting a pan. We hand it to whoever is standing in the kitchen, because there is almost nothing to get wrong — dip, flip, wait, peel. Six heat settings is more granularity than dip-style makers usually offer, and the aqua body is the least appliance-looking finish in this group.

Dip cooking lives or dies on batter consistency, and this one is no exception. The batter needs to be looser than pan crepes, closer to heavy cream than pancake batter, or it slides off the plate and back into the dish. Hold the plate in the batter a beat longer than the booklet suggests on the first crepe, then adjust. Use the included plastic spatula or a silicone one, since metal will scratch the coating. The 8-inch plate makes small crepes, which is right for a family breakfast and wrong if you want one big crepe to fold around a filling.

Worth Noting

  • 8-inch plate limits crepe size
Our Verdict

The easiest crepe maker here for beginners and small kitchens: dip, flip, and peel, with an 8-inch plate that stores in a drawer.

Check Latest Price
4

NutriChef PCRM12 Crepe Maker Best Budget

Black NutriChef PCRM12 12-inch nonstick electric crepe maker with wooden spatula and spreader

Tight budgets

Bake Score 89/100
Power
1000 watts
Heat Settings
4
Cooking Surface
12 inches
Coating
Nonstick, PTFE-free
View on Amazon

A 12-inch cooking plate for the least money in this roundup is the whole argument. The NutriChef throws in a wooden spreader and spatula, and its nonstick surface is stated as PTFE-free, which matters to buyers who have sworn off flaking pans.

Heat is where it gives ground. The plate is thin aluminum with four numbered settings and an LED that tells you the power is on rather than how hot the surface is, and it wants a long preheat before the first crepe. Even then, the middle browns ahead of the outer ring. Keep the spreader moving, cook one crepe at a time, and let the plate recover between them, and the results are respectable for the money.

We still recommend it, with a condition attached. It suits a household that makes crepes occasionally — a birthday breakfast, a snow day, the weekend the kids discover Nutella — and does not want to spend much finding out whether the habit sticks. If crepes become a weekly ritual, the extra money for a plate with steadier heat is money well spent, and the CucinaPro 1448 is the one we point to.

Worth Noting

  • Wooden spreader and spatula feel rough and thin
  • One-year warranty only
Our Verdict

The budget pick: a full 12-inch plate and tools for the least money here, if you can live with a slow preheat and uneven browning.

Check Latest Price
5

Morning Star 13-Inch Crepe Maker Best for Large Batches

Silver and black Morning Star 13-inch nonstick electric crepe maker with spreader and spatula

Big batches

Bake Score 86/100
Power
1000 watts
Heat Settings
3
Cooking Surface
13 inches
Included
Batter spreader, wooden spatula
View on Amazon

Thirteen inches is the pitch, and it is a real difference: batter spread to the edge makes a crepe that hangs over the sides of a dinner plate, with room left for a dosa or a flatbread that would overflow a 12-inch machine. The trade is counter space — the base is 14 inches square and wants a shelf rather than a drawer.

A wide, thin aluminum plate sheds heat when cold batter lands on it, and we noticed the recovery more here than on the smaller machines: the crepe after a pause comes out paler than the one that follows a steady rhythm. Cook back-to-back rather than in stops and starts and the plate stays ahead of you. That is also how this machine earns its keep — it is the one here built for a hundred crepes before noon, turning out course after course while you keep the filling warm.

The build is sturdy, the rubber feet do not slide, and cleanup is the same cool-and-wipe routine as everything else in this group. If your crepe making is two at a time on a Sunday morning, you are buying surface you will not use; if it is a crowd, the size pays for itself in a single brunch.

Worth Noting

  • 14-inch footprint needs dedicated storage
  • Most expensive pick in this group
Our Verdict

The pick for feeding a crowd: a 13-inch plate turns out oversized crepes and dosas fast, provided you keep it working steadily.

Check Latest Price
6

Gourmia GCM1435 Crepe Maker Best for Stainless Looks

Stainless-trimmed Gourmia 12-inch nonstick crepe maker with temperature dial and batter spreader

Stainless looks

Bake Score 85/100
Power
1000 watts
Heat Settings
3
Cooking Surface
12 inches
Weight
3.5 lb
View on Amazon

Most of these machines look like laboratory hot plates. The Gourmia does not: stainless trim, a low three-inch profile, and a finish that reads as designed for a kitchen rather than borrowed from a dorm room. It is also the heaviest plate in this group at 3.5 pounds, and in our handling that weight shows up as a base that stays put when the spreader goes around the rim.

The controls are straightforward — a dial with three settings and a power light — but the plate wants a serious preheat. Turn it on before you start mixing the batter rather than after, and the first crepe behaves. Once it is up, it holds well enough for a stack, with the browning running a little darker toward the center than at the edges.

Time is what holds it back. This is a 2025 design, which is the honest reason we rank it below the older, more proven machines here rather than any flaw in how it cooks. For a buyer who wants a stainless machine living permanently on the counter, it is a reasonable bet with a solid base and a sharp look.

Worth Noting

  • Only three heat settings
Our Verdict

A good-looking 12-inch plate with a heavy, stable base; we rank it below the top picks because it needs a long preheat and has less of a record.

Check Latest Price
7

Euro Cuisine CM20 Crepe Maker Best for Ceramic Coating

White Euro Cuisine CM20 12-inch ceramic nonstick crepe maker with spreader, turner, and ladle

Ceramic coating

Bake Score 84/100
Power
1200 watts
Heat Settings
8
Cooking Surface
12 inches
Coating
Ceramic, PTFE- and PFOA-free
View on Amazon

The coating is the reason to look here. Euro Cuisine fits a ceramic nonstick plate and states it is free of PTFE and PFOA, which makes it the only ceramic surface in this group and one of two machines here that claim a PTFE-free plate. For anyone replacing flaking nonstick pans, a different formulation is a real draw rather than a marketing line.

On paper it is the most flexible machine here: 1,200 watts, eight heat settings, and a three-piece kit with a spreader, a turner, and a ladle, plus a three-year warranty that is the longest fixed term in the group.

Two things to know before you commit. Keep metal utensils and abrasive sponges away from the plate, and look the surface over when the box arrives — a marked plate is worth returning before the window closes. An early failure is the other risk to know about, and the three-year warranty is the remedy for it.

Where that leaves us: this is the pick for the buyer who cares about the coating first and the temperature range second, and who wants a wide dial to work with. If predictable results matter more than what is in the coating, the CucinaPro 1448 with its five settings and its longer history is the more proven choice.

Worth Noting

  • Heat is less even than the top picks
  • Ceramic coating scratches more easily than coated aluminum
Our Verdict

We recommend it for the coating: a ceramic, PTFE-free 12-inch plate with eight settings and a three-year warranty, if you can accept less even heat.

Check Latest Price
8

CucinaPro 1447 Cordless Crepe Maker Best for Table-Side Crepes

White CucinaPro cordless crepe maker with dipping plate, batter spatula, and cord wrap

Table-side crepes

Bake Score 83/100
Power
120 watts
Included
Dipping plate, batter spatula, recipe booklet
Weight
2 lb
Design
Cordless dip-and-flip plate
View on Amazon

There is no cord on the plate itself. The base heats it, you lift it off, and you carry it to the batter — which means you can set the dipping dish at the table and make crepes in the middle of a conversation without a cord dragging through the butter dish.

Dip-and-flip rewards a loose batter. With a modest heating element under the plate, it comes up slowly and does not recover quickly, so the rhythm is a quick dip, back onto the base face-up, and a wait. Thick batter slides off the plate; thin batter clings and releases cleanly, so mix yours wetter than you would for a pan.

Speed is the trade-off. A 1,000-watt griddle in this group cooks circles around a 120-watt plate, so a stack for four takes real time at the table. What you get in exchange is a plate that wipes clean, a cord that wraps around the base, and two pounds of machine that goes on a shelf without complaint.

We kept it in the list because nothing else here makes crepes at the table, and that is the whole case for it. For a batch for eight, the flat-plate machines above are the better tool every time.

Worth Noting

  • No heat adjustment beyond on and off
  • Dipping leaves batter on the dish and counter
Our Verdict

A cordless dip-and-flip plate for table-side crepe making and apartment kitchens; it is slow, so buy it for the ritual, not the volume.

Check Latest Price

How We Tested 12 Crepe Makers Over Six Months

We started with roughly 40 machines sold online and at national retailers, then filtered by cooking surface size (8 to 13 inches), thermostat type, what came in the box, and whether the plate could be wiped clean without a fight. Twelve made the cut, and each one lived on a counter for at least three weeks across a six-month stretch.

Cooking happened when crepes actually get made: slow Sunday mornings, a few rushed weeknight dinners, and the occasional breakfast-for-a-crowd. Every machine got the same batter — flour, milk, eggs, melted butter, rested half an hour — so the differences came from the plate, not the recipe. We dipped on the shallow-plate models and poured and spread with the supplied spreader on the flat ones, judging each by the first crepe off the plate. Midway through, we cooked eggs and pancakes on every machine to see whether the griddle claim held up.

Heat was the first thing we checked. We read surface temperature with an infrared thermometer at the center and near the rim, then watched where the crepe browned first and whether a pale ring formed at the edge. Between batches we timed how quickly the plate recovered, and we noted whether batter grabbed on contact or slid ahead of the spreader — the difference between a thin, even crepe and a lopsided one.

Cleaning got its own round: we let batter dry on the plate, then wiped it the way a real person would after dinner. Over the weeks we kept count of batches, looked for scuffing on the nonstick, and checked whether the dial still landed where it had at the start. We also weighed what came in the box against the price — a spreader and spatula included is one less thing to buy.

How to Choose a Crepe Maker

Flat Plate or Dip-and-Flip

These machines come in two shapes, and the choice matters more than any spec. A flat-plate model is essentially an electric crepe pan: you pour batter onto a wide 12- or 13-inch surface and spread it with a T-shaped stick. You control the thickness, the crepes are large, and the plate doubles as a griddle afterward. Our top pick works this way.

A dip-and-flip machine is smaller — a heated round plate on a handle that gets dunked into a dish of batter. There is no spreading to learn, which is why the Baker's Friend is the one we hand to beginners. The catch is the batter: dip plates need it thin, closer to heavy cream than pancake batter, or nothing clings and you end up with a bare plate and a full dish.

Match the Plate to the Batch

Diameter decides crepe size and how many people you can feed. An 8-inch plate turns out crepes that fit a salad plate, which is right for dessert crepes and children, and the machine stores in a drawer. A 12-inch plate makes a crepe that fills a dinner plate and folds around a filling — the picture most of us have in mind. A 13-inch plate adds room for dosas and flatbreads, plus a larger footprint to park.

Bigger is not automatically better. The wider the plate, the more surface the heating element has to keep even, and a large thin plate is harder to hold at temperature than a compact one. If you mostly cook two crepes at a time, the extra inches cost you cabinet space for nothing.

Heat Control and Recovery

Wattage tells you how fast a plate heats, not how steadily it holds. What separates a good machine is recovery: how quickly the surface comes back after a cold ladle of batter lands on it. Thin aluminum plates drop temperature on contact, which is why a well-preheated three-setting model can beat a five-setting one in the wrong hands.

Give any plate a longer preheat than feels necessary, with nothing on it, and cook steadily rather than in bursts. If crepes become a weekly habit, pay for more settings — the five steps on the CucinaPro 1448 are easier to fine-tune than a three-position dial, especially when you want pale crepes rather than browned ones.

Coating and Cleanup

Every machine here is nonstick, and the coating is the part that ages. Standard nonstick is the slickest option; ceramic, like the plate on the Euro Cuisine CM20, is a different formulation and the one to choose if a stated PTFE- and PFOA-free surface matters to you. Either way, treat the plate like a good pan: no metal utensils, no cutting on it, no abrasive sponges.

None of these plates should go in the sink. Wipe with a damp cloth once the plate has cooled, and deal with baked-on batter with a soak on a cloth rather than a scraper. Look the surface over when the box arrives — a scratched coating is a spent coating, and a mark found on day one is a return, not a repair.

What's in the Box and What to Add

A spreader, a spatula, and often a dipping dish come with these machines, and several include a recipe booklet. You will still want a ladle for portioning, a thin flexible turner for lifting crepes, and an oven-safe plate to stack finished ones on in a low oven.

Warranty is worth a glance: most models here run one year, the Euro Cuisine covers three, and the G&M carries a lifetime replacement. Then check the cord. Several machines in this group have short cords, so know where your outlet sits before you give one permanent counter space.

Frequently Asked Questions

Final Verdict

The G&M Kitchen Essentials 12-inch is the machine we point most people to: a wide plate with a rim that forgives an uneven hand, a spreader and a real recipe book in the box, and the longest warranty in this group. It is the one that makes crepe making feel like a weekend habit rather than a project.

If heat control is what you are chasing, the five settings on the CucinaPro 1448 justify the step up in price, and the Baker's Friend is the pick for a kitchen with no cabinet to spare.