The 7 Best Half Sheet Pans of 2026

The sound of a sheet pan buckling in a hot oven is unmistakable: a sharp pop, then the tray lurches and whatever is on it bakes unevenly. Warping is the thing I check first now. A good half sheet pan — the 18-by-13-inch tray that fits a standard oven rack — should roast a full sheet of vegetables, cool a batch of cookies, and go into the dishwasher without a fight.

We baked, roasted, broiled and scoured 14 half sheet pans, from bare aluminum to nonstick to stainless, some sold alone and some paired with a fitted rack. What separated them was gauge and rim construction — how each handled a 450-degree oven, and how easily last night's chicken fat came off.

One thing that surprised me: the size is standard, but depth and rim roll aren't, and that's what decides whether a rack sits flat or a pan of drippings overflows. Heavier isn't automatically better, and you don't need to spend much to get a pan that lasts.

Our Top Picks

The Best Half Sheet Pans

1

Nordic Ware Naturals Half Sheet (2-Pack) Best Overall

Nordic Ware Naturals half sheet pans, two uncoated aluminum baking sheets with rolled steel rims

Everyday baking

Bake Score 96/100
Material
Pure aluminum, encapsulated galvanized steel rim
Set Contents
2 half sheet pans
Outer Dimensions
17.9 x 12.9 x 1 in
Interior Dimensions
17.1 x 12.1 x 1 in
View on Amazon

A half sheet pan earns its keep at the rim. Nordic Ware rolls a galvanized steel bar into the edge, and that closed, steel-cored lip is why the pan stays flat instead of popping and tilting when it hits a hot oven, the failure that sends a tray of cookies sliding into the door. The pan itself is uncoated aluminum, still the best heat conductor you can put in a home oven, and it browns a cookie evenly from the middle of the tray to the corners. Rigid edge, conductive pan: that combination is why this is the pair we tell most people to buy.

We have run these hard: a 475-degree roast of root vegetables, cookies on parchment, a thin sheet cake, and a spill of chicken fat that pooled against the wall without leaking over. The interior measures 17.1 by 12.1 inches, so a standard half-sheet rack or a quarter-sheet silicone mat drops in with room to spare. Two pans is the part that matters more than it sounds. One goes in the oven while the other cools on the counter, and you are not washing between batches on a Saturday morning.

The honest trade is cosmetic. Bare aluminum darkens, spots, and takes on a mottled patina, and a dishwasher speeds all of it up. None of that changes how the pan bakes. A paste of baking soda and water lifts the worst of the residue, and we hand wash ours to keep the surface smoother longer. The lifetime limited warranty is worth having on a pan that is going to look well used no matter what you do.

Our Verdict

We recommend these to anyone who bakes or roasts most weeks: bare aluminum browns evenly, the steel-cored rims stay flat, and two pans keep one working while the other cools.

Check Latest Price
2

USA Pan Half Sheet Pan and Rack Set Best for Rack Roasting

USA Pan half sheet pan with corrugated aluminized-steel surface and matching crosswire cooling rack

Bacon and glazes

Bake Score 95/100
Material
Aluminized steel, Americoat nonstick
Outer Dimensions
17.75 x 12.75 x 1 in
Included Rack
16.75 x 11.5 x 0.5 in
Max Oven Temperature
450°F
View on Amazon

Where the Nordic Ware pans are bare aluminum, this set is aluminized steel under a silicone nonstick coating, and the difference announces itself at the sink. Glazed chicken wings or a rasher of bacon lift off with no soak and no scrub, and the corrugations pressed into the pan hold the food slightly off the flat so air moves underneath.

The rack is the reason we keep this set in rotation. It is bakeable to the same 450 degrees as the pan, it stands on six raised feet that hold it clear of the drippings, and the crosswire spacing is tight enough that a pork chop or a strip of bacon does not sag through. Bacon, wings, and a spatchcocked bird all come out with dry skin and a pan that needs a rinse. Cookies work on the pan itself, though a silicone mat bridges the corrugations instead of lying flat, so we bake those on aluminum.

The coating sets the ceiling. At 450 degrees the pan is at its rated limit, which rules it out for a hard broil or the 475-plus roasts an aluminum pan shrugs off, and it means hand washing with mild soap and no metal utensils if you want the surface to last.

Worth Noting

  • Some pans buckle in a high-heat oven
Our Verdict

The pan we pull out for bacon, wings, and glazed anything: a nonstick surface that releases it all, plus a bakeable rack, as long as the oven stays at or below 450 degrees.

Check Latest Price
3

Rottay Stainless Steel Pan and Rack Set Best Stainless Set

Rottay stainless steel half sheet pans with two matching wire cooling racks in a silver finish

Coating-free roasting

Bake Score 94/100
Material
Stainless steel, no coating
Set Contents
2 pans, 2 racks
Pan Size
18 x 12 x 1 in
Rack Size
16.3 x 11.4 x 0.65 in
View on Amazon

Stainless steel is the answer for anyone who wants a sheet pan with nothing on it and nothing in it: no nonstick layer to wear through, no aluminum under the food. This set gives you two 18 by 12-inch pans and two racks for less than most single coated pans of the same size, and the steel is heavy enough that it does not feel like a catering throwaway.

Steel moves heat more slowly than aluminum, and that shapes what the pan is good at. Roasted vegetables, sheet-pan dinners, and a spatchcocked chicken all come out well, with the rack holding the food above the drippings. A delicate cookie browns less on the bottom than it would on bare aluminum, a real difference if you bake pastry and a non-issue if you mostly roast. The rack wires are welded close together, so a cherry tomato or a rasher of bacon stays put.

We like this set best as the second pair in a kitchen that already bakes on aluminum, and as the only pair in a house that would rather scrub than think about a coating. The pans came dead flat and have held their shape through repeated high-heat roasting, which is not something we can say for every stainless set here.

Worth Noting

  • Wire racks bend under a heavy roast
Our Verdict

Coating-averse cooks should start here — we get two stainless pans and two racks for less than our top pick, with nothing on the surface to wear through.

Check Latest Price
4

Umite Chef Half Sheet Pan Set Best Budget

Umite Chef two-pack of uncoated aluminum half sheet pans with reinforced rolled rims

First-time bakers

Bake Score 93/100
Material
Uncoated aluminum with solid core rim
Set Contents
2 pans
Gauge
18-gauge (0.8 mm) aluminum
Listed Size
18 x 13 in
View on Amazon

The 18 by 13 on the box is the outside of the rim. The flat baking area inside it runs closer to 17 inches, which is enough of a shortfall that a standard half-sheet rack or lid sits up on the lip instead of dropping in. You will not notice while roasting vegetables. You will notice the first time you try to line the pan with a mat cut for a real half sheet.

What the pan does, it does well for the money. The aluminum is 18-gauge, about 0.8 mm, thicker than most at this end of the price range, and the rim is a reinforced encapsulated solid core. Cookies brown evenly from edge to edge, vegetables roast instead of steaming, and the pan is rated to 500 degrees, so a hot oven does not scare it.

A dozen rounds of vegetables and cookies later, ours are still flat, which was the thing we doubted most at this price.

Worth Noting

  • Hand wash recommended to avoid oxidation
Our Verdict

Buy these when the budget is the constraint and even browning is not up for compromise; we only ask that you not plan on standard half-sheet racks and lids fitting.

Check Latest Price
5

Saffron & Sage Half Sheet Pan Set Best for Hot-Oven Roasting

Saffron & Sage natural aluminum half sheet pans, pair of rimmed baking sheets with thick rolled edges

Hot-oven roasting

Bake Score 92/100
Material
Thick-gauge natural aluminum
Set Contents
2 pans
Pan Size
18 x 13 x 1.05 in
Rim
Reinforced rolled edge
View on Amazon

Pick one of these up by a corner with a chicken on it and nothing flexes. The gauge is thick, the rim is rolled and reinforced, and the pan feels closer to a hotel pan than to the thin cookie sheet it replaces.

Stiffness is what we are paying for here. A pan that does not bow holds an even layer of batter, which is why our cookies came out the same shade at the corners as in the middle, and it sits flat on a rack instead of rocking. The 18 by 13 by 1.05-inch size is a true half sheet, so a standard rack drops inside the walls.

High heat is the open question with any bare aluminum pan, and this one is no exception: at 425 degrees and above, warping is the risk, and a warped pan rocks instead of sitting level. We keep ours under that mark for long roasts and use it hard for cookies, vegetables, and anything that wants a hot, even floor.

Worth Noting

  • No rack or mat in the box
Our Verdict

For cooks who want a stiff, thick-gauge aluminum pan that bakes evenly and sits flat on the rack, we think this pair is the quiet value in the group.

Check Latest Price
6

TeamFar Stainless Steel Half Sheet Pans Best for Dishwasher Users

TeamFar stainless steel half sheet pans, pair of mirror-polished rimmed baking trays

Dishwasher users

Bake Score 91/100
Material
18/0 stainless steel
Pan Size
17.6 x 13 x 1 in
Cleaning
Dishwasher safe
Finish
Mirror polished
View on Amazon

The mirror polish is the first thing anyone notices. These look like they belong in a pastry case rather than a roasting oven. Both pans are 17.6 by 13 by 1 inch, made from 18/0 stainless steel with no coating and no aluminum anywhere in the construction, and both are dishwasher safe.

Stainless is the material for people who want to stop thinking about their bakeware. There is no coating to scratch, nothing to baby, and a burnt-on corner of a sheet-pan dinner lifts after a soak. Food releases more readily than bare steel usually manages: a thin film of oil is enough for most things, and cookies came off ours without parchment.

What you give up is browning. Steel does not push heat into a cookie the way aluminum does, and the polished surface reflects some of it back, so expect paler bottoms and a slightly longer bake. If deep caramel on the underside of a cookie is the goal, this is not the pan. For roasting, for anything saucy, and for a pan you would rather scrub than pamper, we reach for it first.

Worth Noting

  • Can flex at 350°F and above
Our Verdict

For cooks who want a sheet pan they can scrub and dishwasher without a second thought, these stainless pans are the pair we point to — just do not expect aluminum-grade browning.

Check Latest Price
7

CEKEE Half Sheet Pans with Racks Best for Smaller Ovens

CEKEE stainless steel half sheet pans with two matching wire racks in a bright silver finish

Smaller ovens

Bake Score 90/100
Material
Stainless steel, no coating
Set Contents
2 pans, 2 racks
Pan Size
18 x 12 x 1 in
Cleaning
Dishwasher safe
View on Amazon

Load the rack, not the pan. That is the trick with this set: a chicken, a salmon fillet, or a pound of bacon goes on the crosswire rack, the pan underneath catches everything, and the food cooks with hot air moving under it instead of sitting in its own fat.

The pans are 18 by 12 by 1 inch, stainless, uncoated, and dishwasher safe. The racks are welded with tight parallel wires and stand on six feet so they do not slide. At 12 inches wide they are a touch narrower than a true half sheet, which is exactly why they clear a convection oven or a tight cabinet that an 18 by 13 pan will not.

Two of these fit side by side on one oven shelf, which turns a single rack into a two-zone setup: vegetables on one pan, a protein on the other, both done at the same time. The pans stack flat in a corner of a cabinet when the baking is over.

We kept reaching for these on weeknights, when the point is getting dinner onto a rack and out of the oven with the least washing up. That is the case this set makes, and in a small kitchen it is a more useful case than a full-size half sheet.

Worth Noting

  • Warps above 350°F
Our Verdict

Smaller ovens and weeknight roasting are what this set is built for, and we think two pans, two racks, and a 12-inch width justify it — provided you keep the heat under 350.

Check Latest Price

How We Chose and Tested Half Sheet Pans

We started with more than 60 half sheet pans on the market and narrowed to 14 for hands-on testing, filtering first by size — an 18-by-13-inch pan with a 1-inch rim that clears a standard oven rack — then by construction: bare aluminum versus stainless versus nonstick, rolled rims versus encapsulated steel cores, and whether a fitted rack came in the box. Test pans ran from budget two-packs to heavier commercial-style trays. All of them lived in my kitchen for six months, washed and reused the way yours would be.

Warping showed up fastest. I preheated each pan empty in a 450-degree oven, listened for the pop, then set it on the counter and pressed the corners to see if it rocked. The pans that held flat did so through repeated high-heat cycles; the ones that didn't bowed at the center and scorched the edges of whatever I was roasting. Every pan also went through weeknight sheet-pan dinners at 425, batches of drop cookies at 350, broiler nachos, and a spatchcocked chicken, with the included racks pressed into service for cooling and draining.

Cleaning counted as much as baking. I let grease and caramelized sugar cool on the surface, soaked each pan for 15 minutes, then scrubbed and ran it through the dishwasher, tracking which finishes stained, which scratched, and which came out looking new. I stacked, twisted, and dropped each pan onto tile to see how rims and corners held up, and weighed what you actually get for the money — a two-pack of thin trays costs less and lasts less, which is not the same as value.

How to Choose a Half Sheet Pan

Measure before you trust the label

Half sheet means 18 by 13 inches on the outside, and most of them land around 17 by 12 inside once the rolled rim is counted. A jelly roll pan is 15 by 10; a quarter sheet is 13 by 9. The label is where shoppers get caught: sets called half sheet sometimes measure 17 by 13, or a nested set whose largest pan is 16 inches across. If you plan to drop a standard half-sheet rack, lid, or mat into it, those inches are the whole decision.

Take two measurements before ordering: the clear width and depth of an oven rack, and the inside of the sheet pan you already own. An 18-inch pan leaves room to spare on a standard range rack, but a wall oven or a countertop oven is a different story. If the fit is tight, choose the pan that clears rather than the one with the better spec sheet.

The material decides how the pan bakes

Aluminum moves heat faster and more evenly than steel, which is why pastry kitchens run bare aluminum: cookie bottoms brown evenly instead of in dark rings. There is no coating to chip or flake, and it will discolor. Stainless is the opposite trade — inert, dishwasher friendly, slower to brown — so it suits roasting and sheet-pan dinners better than delicate cookies.

A nonstick coating sits between the two. It releases sugar, glaze, and bacon fat that would otherwise weld themselves to bare metal, at the cost of a temperature ceiling — the USA Pan set here tops out at 450 degrees — and a surface that eventually wears. If you bake mostly cookies and bread, skip it. If you cook sticky things, it earns its keep.

Warping is a rim problem

A pan warps when the metal of the flat expands faster than the edge holding it. A closed roll with a steel core, which both Nordic Ware and Umite Chef use, resists that far better than a thin folded lip, and heavier gauge helps. It matters beyond looks: a pan that pops in the oven rocks on the rack, and a tilted pan tips juices and batter toward one corner.

Look for a solid rolled edge rather than a sharp fold, and treat a warped pan as finished — bending it back leaves a high spot that scorches whatever sits on it. Thermal shock is the other failure mode, so let a cold pan come up to heat with the oven instead of dropping it into a 450-degree cavity.

Racks, mats, and how many pans you need

An included rack is worth paying for if you cook bacon, wings, or a whole bird: the food sits above the pan, air circulates underneath, and the drippings land clear of the meat. Check the rack against the pan's interior, since it has to sit down inside the walls rather than perch on top. Racks are usually the first part of a set to bend, so a dense crosswire pattern outlasts a sparse one.

For most households a pair beats one premium pan: one in the oven, one cooling, no washing between batches. Line them and cleanup drops further — parchment for cookies and cakes, a silicone mat for anything sticky, and nothing at all when you want the deepest browning.

Frequently Asked Questions

Final Verdict

The Nordic Ware Naturals pair is what we tell most people to buy. Bare aluminum browns evenly, the steel-cored rim keeps the pan flat through a hot roast, and the 17.1 by 12.1-inch interior takes standard half-sheet racks and mats. It is the least fussy way to spend money on bakeware.

Change the requirement and the pick changes. If bacon, wings, and sticky glazes are the regular rotation, the USA Pan set's nonstick surface and bakeable rack save real scrubbing, as long as 450 degrees covers what you cook. If the budget is the hard constraint, the Umite Chef pair bakes just as evenly — it is simply an inch short of a true half sheet, which matters only if you already own racks and lids sized for one.